金属切削加工におけるせん断角理論の実験的検討

URI http://harp.lib.hiroshima-u.ac.jp/hkg/metadata/1515
File
Title
金属切削加工におけるせん断角理論の実験的検討
Title Alternative
Experimental study on shear angle theory of metal cutting
Author
氏名 平松 孝俊
ヨミ ヒラマツ タカトシ
別名 Hiramatsu Takatoshi
氏名 李木 経孝
ヨミ スモモギ ツネタカ
別名 Sumomogi Tsunetaka
氏名 大森 正信
ヨミ オウモリ マサノブ
別名 Ohmori Masanobu
Subject
cutting force
shear angle
orthogonal cutting
cutting speed plastic deformation
Abstract

The data on metal cutting forces are required not only for the design of machine tools and cutting tools but also for the determination of cutting condition. Many researchers concentrated their efforts on the theoretical study and the empirical study for the prediction of the shear angle that dominates the cutting forces. In the orthogonal cutting tests of various materials under the cutting condition in the range of practical operation,the shear angle is shown to be strongly affected by the cutting speed and to be expressed with a simple empirical equation. However, since the empirical equation is not in sufficient agreement with the theoretical equation, it is necessary to develop the rule that dominates the shear angle. New consideration concerned with the propagation velocity of plastic deformation could be introduced.

金属切削における切削抵抗は,工作機械や工具形状設計のためだけでなく切削条件の決定のためにも必要である。多くの研究者により,切削抵抗に影響を及ぼすせん断角の予測について理論的,実験的検討がなされてきた。実用域の切削条件のもとで様々な材料の二次元切削試験が行われ,せん断角は切削速度に深く関係し,簡単な実験式で表されることが分かつた。しかしながら,これらの実験式と理論には十分な一致が認められず,せん断角を支配している要因をさらに解明する必要がある。そこで,塑性変形伝播速度という新しい観点からの考察を行う。

Journal Title
広島国際学院大学研究報告
Volume
32
Spage
59
Epage
67
Published Date
1999
Publisher
広島国際学院大学
ISSN
1345-3858
NCID
AA11419398
Language
jpn
NIIType
Departmental Bulletin Paper
Text Version
出版社版
Old URI
Set
hkg