Measurement of welder’s movement for welding skill analysis

URI http://harp.lib.hiroshima-u.ac.jp/it-hiroshima/metadata/12091
ファイル
タイトル
Measurement of welder’s movement for welding skill analysis
著者
氏名 Hashimoto Nobuyoshi
ヨミ ハシモト ノブヨシ
別名 橋本 宣慶
キーワード
manual arc welding
measurement of movement
skill training
抄録

Welding training has some disadvantages such as long time required and need for a considerable quantity of training material; in addition, it is dangerous for beginners. To overcome these limitations, a welding training system using virtual reality can be used to teach appropriate tool movements. However, most trainees may not perform appropriate welding even if they understand the appropriate tool movements. Therefore, teaching appropriate movements of the arm can be more effective than teaching the appropriate movements of the tools. The goal of this study was to produce an effective welding simulator to teach appropriate arm movements. This paper discusses measurements of a welder’s behavior. The angle of each joint of the welder’s arm, including the shoulder, elbow, and wrist, was measured using bend sensors. Electromyography (EMG) sensors were used to perform surface electromyography on a welder’s arm. Six sensor electrodes were placed on two muscles of the upper arm and four muscles of the forearm. A workpiece clamper with charge-coupled device cameras measured the three-dimensional coordinates of each electrode tip. A three-dimensional surface measuring instrument measured the shape of the welding bead. The welding tasks of three professional welders and four beginners were measured. The differences between the movements of a professional’s arm and those of a beginner’s were found. This showed that the beginners moved their elbow and shoulder, whereas the professionals moved all three joints. The EMG signals indicated a tendency for the frequency of variation of the beginners to be greater than that of the professionals. However, more data are needed to clarify this.

掲載雑誌名
広島工業大学紀要. 研究編
49
開始ページ
83
終了ページ
87
出版年月日
2015-02
ISSN
1346-9975
NCID
AA11599110
本文言語
日本語
資料タイプ
紀要論文
著者版フラグ
出版社版
区分
it-hiroshima