内部摩擦を考慮した機械加工系の安定性(第1報)

URI http://harp.lib.hiroshima-u.ac.jp/it-hiroshima/metadata/4170
ファイル
タイトル
内部摩擦を考慮した機械加工系の安定性(第1報)
別タイトル
Vibrational Problems in Machining Process : On The Variation of The Borderlines of stability for A Machined-Tool System (Especially, A Turning One) with Internal Friction Effect in The Machine Structure (Research-1)
著者
氏名 川辺 尚志
ヨミ カワベ ヒサシ
別名 Kawabe Hisashi
抄録

With a view to possibly preventing the chattering in a machined-tool system, the materials having large internal damping such as castiron have been empirically employed and developped as those of the machine structure, continually accompanied by the desire for higher dynamic stiffness (lower dynamic compliance). However, the quantitative analysis for the chatter problems, which takes into account the contribution of internal friction in a structural metal to the stability, does not yet seem to be conducted. So, a theoretical analysis for the occurring mechanism of the self-exited chatter (especially, regenerative one), in an example of a turning cutting process, is presented, which permits the calculation of borderlines of stability from applying the internal friction conception of a real metal solid to the dynamic behaviors (dynamic compliance) of a machine structure assumed as a lumped parameter system with one degree of freedom. It follows from this analysis that the proposed simulation model, which takes the contribution of internal dissipation to the mechanical damping effect into consideration, can certainly explain the chattering more extensively than that proposed by MERRITT, whose originality is from the very often considered damping mechanism (external damping) which operates directly to the equivalent reduced mass of a structure system and parallelly with the spring element. An explanation for the chattering based upon the squared values of controlled area (from the deviation of machined・surface shapes) in linear feedback controlled theory, having the imperfection of neglecting the dynamic characteristics of the cutting processes and therefore admitting of more or less analytical verification,can be regarded as being good practice for the adaptive control to prevent the chattering.

掲載雑誌名
広島工業大学研究紀要
9
開始ページ
103
終了ページ
116
出版年月日
1974
出版者
広島工業大学
ISSN
03851672
NCID
AN0021271X
本文言語
日本語
資料タイプ
紀要論文
著者版フラグ
出版社版
旧URI
区分
it-hiroshima